2000 Toyota Tundra "fix brake" Questions

Ad

...fix my 2000 toyota tundra brake prolem You've heard this a thousand times. Have new brakes put on my toyota and a couple thousand miles later they began to chatter. I heard that a whole new brake ...

Ad

fix this,Thx. HI if you have pulsation after a month  you must replace the rotors they are too thin and the heat is warping them faster then before youhad them turned note you replace  brake

Ad

Question about Toyota Tundra

1 Answer

...i press the brake it doesn't light up, how do i fix i think the wired has a problem check the wired line that source of electricity, if has a problem change the wired line, and its working ...

...fails are BRAKES bad or dirty sensors , or got hit sensors (wheel sensors, see those tone rings???) fix the brakes first, normal brakes. the speedompeter., that is hopefully just a bad fuse. if not a ...

Question about Toyota Tundra

1 Answer

...brake systems on Tundras from 2000-2007. The undersized rotors and drums overheat and warp. Turn them as many times as you want, the vibration will return as soon as you overheat the brakes. The fix ...

Question about Toyota Tundra

4 Answers

...well, for me anyway. :) I just experienced the same problem on my 2002 tundra last night, and fixed it this morning after sleeping on the problem. Here's how it went. I cleaned the terminals, ...

...fix, the parking brake uses the rear brakes through a cable. The cable might be rusted or broken. This is the most common rpoblem. I think that you better get your parking brake fixed sooner rather ...

...fix. Check the brake fluid reservoir for proper level. Press the brake pedal and watch from engine area for pedal movement (or lack there of). Check brake cylinder behind firewall for corroded or ...

Question about Toyota Tundra

1 Answer

...fix a hole like this? Unfortunately no. The brake line holds about 4,500 - 6,000 lbs of pressure when your brakes are applied. The only for sure way to fix this problem is to replace the line itself. ...

fix this problem? If the e brake is stuck the cables are likely bad anyways. Just cut the cables right at the back of the backing plates for the rear brakes. Then replace the cables if you really want

Not finding what you are looking for?
2000 Toyota Tundra Logo

600 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...