Previa. It occurred when starting the engine. Turns out the starter would not disengage from the fly wheel. I believe that the starter was the source of the high frequency noise. Had to disconnect the
...Previa, there was a clicking sound when trying to start. I added water to the battery. Now the starter works, but the engine still won't turn over. low voltage to starter. Check battery for proper ...
...previa any ideas It could be that the switch thats connected to your starting key is worn. Ive seen that before.I would buy a new switch and replace it. Before you work on replaceing the switch,put ...
...previa battery discharges MUST KEEP TURNING KEY IN IGNITION TO GET STARTER TO ENGAGE. WITH KEY OUT OF IGNITION MY HANDHELD VOLTMETER SHOWS A DISCHARGE. HEATER,WIPERS,RADIO ETC. WILL CONTINUE TO WORK ...
Question about Toyota Sienna
...starter motor that would bring the engine to an ... Re: Replacing a Previa head gasket. - ToyotaVanTech www.toyotavantech.com > Forum > Technical Discussion > Toyota Previas Dec 3, 2011 - 20 posts - ...
...worn out, replace the contacts, I managed to buy them at the local Auto shop, but not easy to find, or replace the starter. Removing and replacing the starter is not so easy. Hope this helps. ...
...previa won't start I was in a front end accident and my family and I put it back together. It started before we welded the front headlight assembly on. Now it won't turn over. The starter was just ...
Question about Toyota Sienna
...Previa, it seems to have full battery power (dash lights, radio plays) until I get to the start position. There is one click and every thing goes dead. If I unhook the battery and then connect it ...
previa won't start. yesterday it would turn over, but I wasn't getting fuel.....have checked fuel pump and replaced filter...have put on 2 coil modulaters....checked ALL fuses I could find....
Question about Toyota Cars & Trucks
...previa,starter just spins, replaced starter,now it makes a grinding sound. Checked flywheel-can turn it with screw drive.Full charge on batt. cables are good,connections tight.??? Check the housing ...
639 questions posted
Usually answered in minutes!
572 Questions
501 Questions
382 Questions
333 Questions
274 Questions