...replace it and this will solve the problem which sounds like the fan is on it's last leg. Of course once your into the panel you will have a better idea and this is the only way to answer your ...
...high speed fan but problem remains. I travelled over 500km without Aircon and the temperature gauge is at about a quarter. Please help out if engine over heating coolant over flow jug will boil over ...
...high spped relay open thhe cover and expose the relay with key on collapse the relay does the fan come on? if it doesnt replace the fan module if it does you will still have to replace the fan module ...
...high speed operation, the PCM/ECM supplies the ground path for the cooling fan 1 relay through the low speed cooling fan relay control circuit. After a 3 second delay, the PCM/ECM supplies a ground ...
...high speed. Open circuits will not blow fuses. Replace both switch and resistor bank for all speeds. Make sure to clean leaves and trash from fan housing and see if fan spins freely. In my experience ...
Question about Toyota Sienna
...high speed fan relay over above the battery in the fuse box.Pop the high speed fan relay cover off and manually push the contacts together as a check that the fans can run fast.May just be a bad ...
...the fan defaults to high speed only. The fan resistor is located next to the fan and held into the cooling air duct by 2 screws near the blower motor. The part is fairly cheap and easy to
Question about AC Cars & Trucks
...high speed operation the PCM supplies the ground path for the low speed fan relay through the low speed cooling fan relay control circuit. After a 3 second delay, the PCM supplies a ground path for ...
...high speed because on the high setting the voltage does not go through the resistor. The resistor is mounted beside the blower motor and is easy to replace. There you are, thank you for using FixYa. ...
Question about Buick Cars & Trucks
...high speed operation the ECM supplies the ground path for the low speed fan relay through the low speed cooling fan relay control circuit. After a 3 second delay, the ECM supplies a ground path for ...
639 questions posted
Usually answered in minutes!
572 Questions
501 Questions
382 Questions
333 Questions
274 Questions
