2000 Toyota Sienna "remove door cover" Questions

Ad

...door) loosen and remove the two phillips screws, one above the child-safety latch, and one below. Remove the plastic cover to expose the gears for the door open/close mechanism. There's a bunch of ...

Ad

remove door panel on drivers side 1998 sienna Most every thing is loose, but I can't get the plastic door handle piece loose to finally remove entire panel. there should be two screws holding it to ...

Ad

the two cover bolts in the rear of the vehicle,but for some reason the cover still seams to be stuck in place.any suggestions? you have to open the rear hatch and remove the cover from behind the door

Question about Toyota Sienna

1 Answer

...door trim sienna 07 On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) ...

...Remove the door trim screw, and pry out on the door panel, relieve 10 clips, pull door trim off Remove the horizontal upper trim cover at the top of the door; relieve 4 clips Remove the vertical door ...

Question about Toyota Sienna

1 Answer

...door. First remove the Trim around by popping it out. There are several bolt that hold the panel. un bolt those. Start with the one on the inside Handle. Pop the cover out and you can access the ...

Question about Toyota Sienna

1 Answer

Cannot open hatch door Latch on hatch door broken and I cannot find way to open Remove the hatch interior cover...you can remove the broken hatch handle that way...also open it from there.

...remove the door panel. (The connector for the mirror is behind the panel just to the left of the door handle.) The arm rest cover pops off by gently prying upward at the corners near the door panel ...

...remove the inner door panel, One screw under plastic cap on handle, one under cap on strap... and pop off all plastic buttons(hidden) between the door and cover, a 1" putty knife will work for this. ...

...door where the plastic cover was removed and you should see 2 or 3 bolt heads, remove those bolts and the mirror should now be free to remove from the vehicle. Replace the new mirror in reverse order ...

Not finding what you are looking for?
2000 Toyota Sienna Logo

639 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...