...back door broke. How do I replace that piece so the back door will open? Is there another way to open the back door? I removed one of the license plate lights and saw a screw which may have held the ...
...door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the ...
Question about Toyota Sienna
back the plastic barrier. The exterior handle is held on with two 10mm bolts. Connecting the short cable was pretty obvious once you could see everything. Now I have to teach everyone to open the side
...door handles have been known to age prematurely, many plastic ones cracked and broke a few years down the line. For the back hatch. a cable is attached to a plastic piece and hooked through the latch ...
back hatch on the Toyota because the exterior plastic latch handle broke. I don't believe there is a lever inside that pops it open. I want to open it if possible, and then I want to get the part, and
...door starting at the bottom back corner (you will feel where there is resistance) and the plastic retaining clips will pop loose one after the other. Your panel should now be completely loose on both ...
...back lock of the door slide. I have 1 passenger power slide door and 1 unpower driver side door. the power door is having problem. the unpower is ok To understand how this lock and unlock work, do ...
...back door on 98 Toyota Van, Sienna The little plastic finger in the handle mechanism broke, and the door cannot be opened from the outside What is the best way to access the interior of the door to ...
...back open a bit. The "door open" warning comes on and we can't get it to stay closed. This is on a 2005 sienna xle. Any suggestions? This may or may not work depending on exactly what is wrong with ...
639 questions posted
Usually answered in minutes!
572 Questions
501 Questions
382 Questions
333 Questions
274 Questions
