...fuse panel. Now the car won't start. Well something that a lot of people dont realize is that you cant check a fuse just by looking at it everytime. Sometimes you can look at it and clearly see the ...
...fuse operates the brake lights and running lights. Also the dash lights do not work. All of this started today. The car will start in neutral using the override switch faulty relay or wire short to ...
...start the car it blew the fuse again.All it does is crank and no start.Any help would be appreciated,thanks On top of the cover of the fuses it will tell you what that fuse was for. Odds are whatever ...
Question about Toyota Corolla
fuse which i replaced and still will not start. any suggestions??? it wont start. the lights,radio a/c work but just wont start help Is the starter working, car turning over? Did you replace the other
...start vehicle was fine until 1200hrs yesterday Any gas in the tank...? Yes. Then First check fuses. (Injector fuse, fuel pump fuse, head or main engine relay) It's not bad idea to check all fuses. If ...
...fuse would cause my car not to start at all Fuses don't fail often in your life time & have nothing to do with a no start, unless you have a system with issues If you find any blown fuses, ...
start Blown ignition fuse 1993 toyota corolla dx wagon does not start. Stalled while driving, has not started since. Ignition fuse blows.30Amp in engine bay. Checked for shorted wires, could not find.
...the fuse section of your fuse compartment. hope this helps. and if fuse is good, you can try poking the starter with a stick and try to start. if it does something after poking it, then its the ...
Question about Toyota Corolla
...the fuse to the socket. You can try using a piece of wire to jump across the two silver tabs on the top of the fuse, and seeing if you can start the car, but eventually, that fuse has to come
Question about Toyota Corolla
fuse and it does not start as there is neither spark nor fuel pressure You have a short circuit somewhere, if you could check the fuse box fuse description, it should give a number and amperage and in
920 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions
