2000 Toyota Corolla "replace window" Questions

window from a junk yard tomorrow and replace it myself. Does anybody have tips for me as far as removing the door panel and replacing the window is concerned? THINGS I NEED: Tarp windex toolbox- razor

...switch or the window motor? thank you It's the motor. If the motor turns at all, the switch is good. Make sure the glass is not binding in the track. If it works with a little help, replace the

drivers side window sticks sometimes...does the switch need replacement? The window tracks may be worn and need to be replaced. You may get away with buying a dry silicon lubricant spray and with the ...

...window and replace it. You just need to unscrew the 3 10mm bolts at the rear window with a socket and its pretty handy to replace! ye can pick up a relacement window window at a scrap yad for next to ...

...glass past distorted window guides. If the rubber guides are distorted in any way, they need to be replaced. If not, the motor may be weak, and it may need to be replaced. Sounds like weak motor.

...window and check for continuity using a voltmeter. If there is no continuity, replace the switch. 6 Check for voltage at the switch using a test light. If voltage is not reaching the switch, there is ...

...replace window control panel switch first/junk yard $5-$10 while their price on driver side if cheap enough replace pessenger also.. There was a recall on this several years ago. The windows were ...

...Replace window regulator and motor. Procedure: Remove inside door panel, cut regulator wires, raise window manually and hold in place, undo bolts holding window glass to regulator, undo bolts holding ...

...window motor stick probe of test light into one cavity of connector and you will need jumper wire or paper clip in other cavity for test light ground(alligator clamp) making a loop then press switch ...

working ie. the cable moves upward and downward. However, the window itself doesn't move with the wire, ie in the up position, the window slips back down. Thanks you will need to replace the regulator