2000 Toyota Corolla "ohm spec ignition wires" Questions

looking for between 100 - 150 ohms to be within spec for this car. The ignition coils are what we used to call ignition wires or spark plug wires but now run without a distributor to be more efficient

...outback ? Whats the ohm spec for the ignition wires on the subaru outback 2006? I want to check to see if they need replacing. I can check with an Ohm meter if I knew the spec.  Anybody? 540 ...

ignition wires worn out? Whats the ohm spec for ignition wires Most wires are around 7ohms.

...ignition is turned on ! ohmed all 6 injectors 12.5 ohms spec is 11 - 14 ohms unpluged ecm ohmed wiring from ecm to injector connector ok ! im having trouble finding a schematic online for inj 2 15amp ...

...cylinders, then check your distributor cap for cracks, even very tiny ones. If you have ignition coils, then check the specs with an OHM meter. The OHM meter can also be used to check the plug

...ignition module. this is under the 3 coils they sit on the ign module..You can also test and or replace the spark plug wires, if a wire is 10 inches long it should read 10,000 ohms or less.. No more ...

...ohm's resistance and are within spec's. I've checked all fuse-able link's,and relay's. A friend has a 95 runner and i took all the relay's, ecu,coil, igniter and plugged them into mine and still ...

...spec, go back up to step 5 If coils are bad, replace as needed and retest to confirm Step 8:(90% of the time i bet the problem is solved by now) Start engine. Perform underhood visual inspection of ...

...coil. At the coil,measure the resistance across the primary windings.It should measure between 0.50 Ohms ans 1.00 Ohms. I hope this information is helpful.If you need anything else,don't hesitate to ...

...Ignition Control Unit) from 1997 Olds Cutlass Supreme 3.1L engine. Might you have the specs? I have a good ohm meter. Hand held OBD unit reports multiple random cylinder misfirings. Might it be fuel ...