2000 Toyota Camry "iac engine" Questions

...THANKS YOU FOR YOUE HELP If it were an IAC problem it would do it in reverse also. A bad engine mount can cause shaking in one direction but not the other, Also check your vacum hoses and

...engine idle speed anytime the accelerator is released. One thing to try is to have the IAC valve removed and with a throttle body cleaner, clean the IAC valve and the idle air bleed port on the ...

...IAC without taking it out from the throttle body. 1) remove the black intake hose from the throttle body 2) get a can of throttle body/intake cleaner 3) be VERY careful if you decide to use the straw ...

...IAC (idle air control) motor problem. If your service engine light is on you can take the car to your local Auto Zone or Advance Auto Parts and ask them to scan your car for trouble codes. They will ...

...ENGINE CHECK LIGHT. CHECKED FUEL PRESSUREB OK, MORNING ENGINE START IS OK. Your IAC is sticking. Spray cleaner into it and see if anything changes. If it does you can thorughly clean it or change

...IAC) Valve OPERATION The ECM is programmed with specific engine speed values to respond to different engine conditions (coolant temperature, air conditioner on/off, etc.). Sensors transmit signals to ...

...water hose blocked from the IAC valve. Where does the hose connect to the engine? Depending on which engine you have, this could go to intake or to heater core. Do you have pics or better

...engine light. 4CYL or V6?? Clean/Replace your IAC valve as this will cause rough/erratic idles(may happen intermittedly). IAC valve motor possibly sticking due to dirt and carbon build-up. I also ...

...IAC valve doesn't allow enough air to enter the engine when warm and will cause the engine to not start. Also check the coolant temperature sensor located near the distributor in the water ...

...injected engine. The computer sets it via the IAC (idle air control) valve, which may be dirty or faulty if you are having trouble. The IAC can be cleaned