1999 Toyota Land Cruiser "remove air intake hose" Questions

remove carbon built up behind the EGR valve and the EGR passage tube. === Vacuum leak WILL offset the intended 14.7 to 1 air fuel ratio. More un-metered air (leaks) will lean out the fuel mixture. Use

air passing across the radiator can carry it away. Just flushing the radiator wont remove the lime scale, the radiator would need to be remove and dissassembled and rodded out. I dont think you have a

...Remove air intake hose. Remove PCV valve from cylinder head cover. Remove ISC air hose from idle speed actuator. Remove air hose from behind intake manifold. Remove 2 screws from high tension wire ...

...Remove the air cleaner housing. Disconnect the mass air flow (MAF) sensor electrical connector.Disconnect the air cleaner outlet hose.Remove the air cleaner housing from the rubber bushing.Disconnect ...

...Remove the air filter outlet pipe. Remove the positive crankcase ventilation hose.Remove the air cleaner resonator. Disconnect the throttle body electrical connectors. Disconnect the electrical ...

...remove the air inlet hose from the throttle body and air cleaner cover.Remove the 2 housing cover retaining clamps. Remove the air cleaner cover (5) and carefully remove the air filter element ...

...air cleaner. 5.Remove the upper radiator hose (A) and lower radiator hose (B). 6.Remove the heater hoses 7.Remove the engine wire harness connectors and wire harness clamps from the cylinder head and ...

...to it and loosen the hose clamps on each side of the sensor and pull off flexible air intake hoses on each side of the aluminum body of the sensor and remove the sensor assembly. See picture

Remove the air cleaner outlet tube. Disconnect the intake air bypass hose. Disconnect the positive crankcase ventilation hoses. Remove the air cleaner outlet tube. Disconnect the tube from the exhaust

...REMOVE AIR FLOW SENSOR ASSEMBLY CONNECTOR, REMOVE THE BREATHER HOSE, REMOVE RESONATOR RETAINING NUTS,REMOVE AIR INTAKE HOSE AND RESONATOR ASSEMBLY, REMOVE HEAT SHIELD FROM THE INTAKE MANIFOLD ON ...