...tensioner pulley with your hand, make sure that it spins free & is not noisy, Fit the new belt, and tighten the 12 millimeter bolt until the pulley retracts,and tightens the belt. Finally, retighten ...
...pulley bolt for the tensioner has a left-hand thread. When installing the belt, make sure it fits properly in the ribbed grooves and check to be sure the belt has NOT slipped out of the groove on the ...
How to loosen the idler pulley? How do you loosen the idler pulley? I am trying to remove the belt. Generally you need a large enough breaker bar to force the pulley to move. It takes more than a ...
...pulley by loosing the tensioner which is on the left side you need a long extension ans a 8 mm im not sure about that, but dont take the tensioner bolts all the way out just what you need to take the ...
tensioner pulley to remove and replacethe belts. The tensioner pulley on one fo the belts is located down low and it appears that you will need to remove the engine guard splash pan to get to it. I am
Tensioner pulley binds when bolt is tightened Is it the original bolt? How old is the pulley?
Is there a Belt Tension adjustor on a 2003 4runner 4.0L V6 When its cold it speaks so bad and the belt is only 2 years old Ok, to answer your question yes and no. There is an auto tenssioner that ...
tensioner pulley also. the pulley diagram can be found in the book for around $20.00 at autozone auto parts ao advance auto for about $20.00 this is a detailed book including engine replacement.that's
Tensioner pulley won't turn non original part you're using? I assume so - lot cheaper might have to space it so it doesn't jam anymore - watch for right belt drive after so if the original is still in
pulley moved after taking off belt this is a complex fix. if the timing belt is off, you will have to align both of the cams (V6??) to their respective notches on the back plate that protects the belt
575 questions posted
Usually answered in minutes!
676 Questions
427 Questions
430 Questions
348 Questions
361 Questions