1998 Toyota Sienna "remove" Questions

Ad

...cooling system into a clean container for reuse. Disconnect the heater hoses from the heater core. Remove the steering wheel by performing the following procedure: Position the front wheels facing ...

Ad

Question about Toyota Sienna

1 Answer

...the passenger side front tire to get to the access panel, using a jack stand on the body.2) remove the access panel, and you should see most of the bottom bolts of the water pump3) do not ...

Ad

...Before servicing the vehicle, refer to the precautions in the beginning of this section. Remove or disconnect the following: Battery Battery tray Remove or disconnect the cruise control ...

How to remove trim from rear hatch door on 2001 Sienna I need to check for a loose wire on the defroster grid (on the back glass) of my 2001 Sienna. The plastic trim around the window needs to be ...

...busted inside the control unit ...how can I replace the bulb unside the ac/heater control unit? 1. Remove the dash around radio (just clips) 2. Remove 2 screws pointing up . (You do not need to ...

Question about Toyota Sienna

1 Answer

...timing belt,Sienna 1998: 1.Disconnect battery (-) cable and plastic wiper washer cowl assembly 2.Remove spark plugs and put all wirings,cables out of the way 3.Drain coolant (cold) and remove

...how to change the passenger mirror on a 2007 sienna how to take the old one off Thank you Hi, First remove the door panel. (The connector for the mirror is behind the panel just to the left of the ...

...of the thermostat would have an adverse effect causing a lowering of cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat. 1. DRAIN ENGINE COOLANT 2. REMOVE AIR ...

Question about Toyota Sienna

1 Answer

I need dto remove the radio. how do I remove it from the das? The Front of the dash just pulls off and then the radio has 4 bolts to remove it. I used a flat screw driver to the side to remove mine. ...

...front tires. -Do not set parking break as this may hender removing the rear calipers. Open hood and remove the brake resevoir cap. -Remove hubcaps if applicable, -Loosen Lugnuts but do not remove, ...

Not finding what you are looking for?
1998 Toyota Sienna Logo

457 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...