1998 Toyota Sienna "misfire dtc runs fine" Questions

Ad

...DTC P0303 show there is a misfire in cylinder #3. a possible cause is the ignition coil of the #3 cylinder. Compare the resistance value of the ignition coil of cylinder #3 with the other coil or ...

Ad

Question about Toyota Sienna

1 Answer

...DTC for a misfire in the cylinder you put the injector that was originally in the number 6 position then more than liklely it's the injector that's faulty. Injectors can get dirty and kind of stick ...

Ad

DTC P0303 cylinder 3 misfire detected on 1996 avalon Runs good when I start it. I give it gas while in park and it accelerate fine, but when I drive the car is sluggish and check engine light comes on

Question about Toyota Sienna

1 Answer

DTC P0305 means Misfire Detected, Cylinder No. 5 Since this is the problem then you should let Chrysler handle the problem. You can also confirm this at http://www.troublecodes.net/chrysler/ Rate this

...DTC PO309, Cylinder 9 misfire was detected. P0298 Engine Oil Over Temperature P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 ...

Question about Toyota Sienna

1 Answer

...misfire 3.5L V6 those disconnects, each , will slam the PCM into limphome mode. you need your own $9 scan tool, pulling the sensors, only stores DTC codes. that only hide there real ones. next time ...

Question about Mercury Cars & Trucks

1 Answer

...fine. Any advice appreciated! What engine does it have? V-6 - V8 Looks like one bank of cylinders are dead. P0351 - Ignition Coil A Primary/Secondary Circuit Description: See the description for DTC ...

scan tool and watch all sensor when it fails. too high fuel pressure. misfires cold, but only luke warm cold starts not fully cold. just one DTC, no P0300 or 30x misfire codes, not even P0300 pendings

Question about Suzuki Cars & Trucks

1 Answer

...DTC) with a scan tool? it can be lots of things. this is called Misfire. When misfire gets bad the CEL lamp in the dash glows running and stores code P030x x =0 to 4 but it is misfiring regardless ...

Question about Toyota Sienna

1 Answer

DTC code is for random misfire This sounds like a classic GM plugged catalytic converter symptom. If you like you could remove the oxygen sensor in front of the cat and try driving it. With the sensor

Not finding what you are looking for?
1998 Toyota Sienna Logo

457 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...