1997 Toyota Tercel "tighten belt air compressor" Questions

...tighten the belt and counterclockwise to loosen it. Air Pump To adjust the tension of the air pump drive belt, loosen the adjusting lever bolt and the pivot bolt. Move the pump in or out until the ...

...tighten the compressor belt which is not working right. so do I have to take the compressor off to change its belt? Hi Lets, If you look carefully at the same adjusting rod you should see a locking ...

...belt manually on. This takes patience ans muscle. Once the belts are in place nmake sure to tighten the nuts and bolts to attain between 1/4" to 3/8" deflection arounf the center of the belts between ...

Tighten them to 37 ft. lbs. (50 Nm). Install the serpentine drive belt on the vehicle. Connect the negative battery cable. Evacuate and charge the system. Perform a leak test. Hope this help (remember

air compressor belt in order to replace the alternator belt but not sure how to loosen the air compressor belt on 1984 Volvo 244 series? Check to see if there is a tensioner pully that adjust the belt

tighten the compressor's bolts with an open-end wrench. 9Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley.

...tighten the belt and counterclockwise to loosen it. Air Pump See Figures 12 To adjust the tension of the air pump drive belt, loosen the adjusting lever bolt and the pivot bolt. Move the pump in or ...

...and air conditioner compressor Unbolt the pulley from the water pump, slip the belt over everything and refasten the the pulley to the pump while the belt is draped over it. Then tighten up the

belt tension and tighten the alternator adjustment bolt to 17 ft. lbs. (23 Nm). Install the suction pipe bracket for the A/C compressor, if equipped. Install the air cleaner. Refill the cooling system

...tighten the compressor's bolts with an open-end wrench. Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley. ...