1997 Toyota Tercel "door lock assembly remove" Questions

Ad

My door handle broke on the Tercel. I need to replace the handle. How do I do that? remove inner panel.. top left you will see clips holding handle on. disconnect from lock assembly then replace

Ad

Question about Toyota Tercel

1 Answer

door lock assembly... Door lock assembly Toyota Corolla 1988-1997 Repair Guide Door Locks - REMOVAL & INSTALLATION (see Figure 1) Disconnect the negative battery cable. Remove the door panel and ...

Ad

...DOOR LOCK ASSEMBLY (a) Disconnect the connector. (b) Remove the bolt. (c) Using a "torx" socket wrench (T30), remove the 3 screws. (d) Slide the rear door lock assembly downward, pull out the link ...

Question about Toyota Tercel

1 Answer

...door lock on my 2008 Impala LT will not lock and unlock with the remote control. All others work ok. Can only operate left read lock manually. Hello: The lock/unlock unit is part of the mechanical ...

door lock machine. How I remove the Sequoia 2004 driver door lock. You must remove door panel roll window up and remove, rear window channel by door latch, remove three screws that hold latch assembly

...door lock switch and remove the door opener handle assembly. Carefully pry off the cap(s) in the armrest pocket, then remove the screw(s). Carefully pry off the cap under the armrest and remove the ...

...lock actuator from the door assembly, the outer door panel must first be removed, as follows: If working on a front door, remove the side mirror from the door assembly. Refer to the procedure earlier ...

...lock cylinder and door handle assembly. Use a small flathead screwdriver to slide retaining clips forward, and linkages will come free. Remove one black 14mm nut from the very top of the door handle ...

...door lock actuating rod at the door handle assembly: Release the door lock actuating rod clip. Position the door lock actuating rod aside. Remove the front door weather shield. CAUTION Make sure the ...

...door lock actuator. Remove the door locking system module nuts and bolt. Remove the door locking system module from the door. To install: Installation is the reverse of removal, but make sure to ...

Not finding what you are looking for?
1997 Toyota Tercel Logo

317 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...