1997 Toyota Tercel "check lower ball joints" Questions

...lower arm and torque the bolt and two nuts to 59 ft. lbs. (80 Nm). Connect the tie rod to the knuckle and torque the nut to 36 ft. lbs. (49 Nm). If the cotter pin cannot be installed, tighten to the ...

check the jack. You may need to adjust the jack to support the weight of the trans. Next, remove the trans to engine bolts. Look for where the casing for the trans and engine block meet. You will find

...at AutoZone.com. Parts are justpart of what we do. ... Duralast/Ball Joint - Lower, Part Number: FA1490 ... Dodge Stratus Ball Joints ' eBay we are not an auto parts store check with one of those

...check out this few help links.Click the link below to go through its procedure:----Upper Ball Joints inspection and replacement? ...

...attached. Install the tire and wheel. Lower the vehicle. Check the front wheel alignment. these jouints are pressed in and there is a flange that is flared this is what the tool numbers refer

...Check compression lower arm, lateral lower arm, dust covers, and bushings for damage and wear. Installation To install, reverse removal procedure. Use NEW ball joint nuts. Lubricate lip and inside of ...

...(45 Nm) Wheel hub and bearing, if removed Tire and wheel Lower the vehicle Drive axle nut, if 4WD, and tighten to 103 ft. lbs. (140 Nm) Wheel center cap, if removed Check the front wheel

...bolts. Tighten to 62 inch lbs. (7 Nm). Install the front wheel and tire assembly, then carefully lower the vehicle. Connect the negative battery cable and check for proper suspension ...

...check money order for $4.49 postpaid for each set ordered. ... Conversely, with a tension-loaded ball joint, force on the joint works to pull fast ball joints by taking pressure off primary ...

...lower control arm. Some parts store will have presses for loan. You will have to check around and see if any in your area have these. If you can't find one you could always pull the control arm ...