1997 Toyota Tacoma "timing tensioner keep breaking" Questions

...timing belt tensioner is losing/has lost the ability to keep tension on the timing belt and it's out of time. 4. There's a break or a sort in the wiring. You'll need a schematic and a mutlmeter to ...

TSB covering how to fix this problem. Have you checked the oiler supply to the timing chain and the chain tensioner Just a thought. The guides usually only break from the lack of tension on the chains

...timing belt tensioner. Stop driving it because you are probably due for a new timing belt also if the tensioner is bad. If the timing belt breaks while you are driving it, serious damage may occur ...

TIMING BELT KEEPS BREAKING MY TIMING BELT KEEPS BREAKING EVERY TIME I PUT A NEW ONE ON. How are the tensioner pulleys? Is everything in line? Do the camshaft/s spin freely?

...timing belt or serpentine belt. If they are not replaced the bearings can wear out and lock the tensioner and possibly break it. By tensioner i asume you are talking about a belt tensioner that your ...

...BREAKING I HAVE CHANGED THE TIMING BELT 6 TIMES AS WELL AS THE PULLEYS AND IT STILL KEEPS BREKING.. HELP Either its over tensioned or the pulleys are not lined up properly .Does it just snap or seems ...

breaking the arm. what is the deal? it need a new ac compressor. If you have 1 sepentine belt make sure the tensioner isn't loose, defective or cocked at an angle. If it doesn't have an tensioner make

...timing chain guides are plastic and wear out,i would rec doing it,,,,but do the guides (2) front and rear and the chain,the tensioner,and lower crank sprocket and cam gears,,,,,if the car is in good ...

...breaking on 2000 mazda protege. belts squeal all the time then break do you have a siezed tensioner pulley that could do it . remove the serpentine belt and check the idler puller, then the alt if ...

...keep breaking everytime I have replaced them, a total of three times.They broke during the winter and during the summer months.In fact the autoparts place told me this model is suppose to have three ...