1997 Toyota Tacoma "socket install blue bulb lighted" Questions

Ad

Question about Toyota Tacoma

2 Answers

...socket with a test light while ignition was on and turn signal on. Test light would blink on and off just as it should. However, when i install the bulb it doesnt blink and checking with test light ...

Ad

Question about Toyota Tacoma

2 Answers

...blue wires at the splice pack. once you find it you are going to need an assistant, or maybe a pretty good sized rock. brakes lights work with ign off, so do it that way, it's safer. get somebody to ...

Ad

...socket-which is nothing more then a blue plastic piece where the bulb actually seats). Its a horrible design. To replace the bulb you need to gently remove the entire light assembly from each side ...

Question about Toyota Tacoma

1 Answer

...socket of the headlight.Turn the black retaining collar of the headlight counterclockwise to remove it and the headlight from the headlight assembly.Install the new headlight by reversing the ...

Question about Toyota Tacoma

2 Answers

...with new quality one).this camaro seems to have many elec. problems in many different forms.is it sockets, relay, unknown, or a crazy elecrical part.help!!!thanks in advance. sounds like two ...

...socket on brown to blue/w wire The brake lights (excluding the 3rd brake light) go through the turn signal switch. It's possible there's a bad connection in the switch causing your symptoms. I would ...

Question about Toyota Tacoma

2 Answers

...socket back to the loom are as follows No 1 Pin--- Yellow Wire---Left Side Flasher No 2 Pin--- Blue Wire------Fog Lamp. No 3 Pin--- White Wire--- Earth. Must have good contact or nothing else will ...

install 1 step says Place the igniter on the HID lamp. Do not at this time connect the igniter electrical connector. It will make it unable to twist the igniter to the closed position. the igniter can

Question about Toyota Tacoma

13 Answers

...socket counterclockwise one-quarter turn and remove from the circuit board. Pull bulb straight out of holder. Installation is the reverse. Thank you very much that I actually did works it's always ...

Question about Toyota Tacoma

1 Answer

blue corrosion inside the connector, this corrosion, if present will also give you thi scondition. Lastly, look closely at the bulb sockets, and see if there is any corrosion where the bulb plughs in.

Not finding what you are looking for?
1997 Toyota Tacoma Logo

484 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...