1997 Toyota Tacoma "97 replace thermostat" Questions

...if not you got a bad one. i have a 97 tacoma and got two bad ones before i got a good one you can also ask for a 160 degrees thermostat that will make it run cooler and pro long the life of the ...

...thermostat is stuck on a 97 nissan maxima my 97 nissan maxima run hot after riding a while.Both fans sometime come right on when I first crank it in the morning,but they continue to run. I've ...

...THE ENGINE TORQUE THERMOSTAT OUTLET HOUSING BOLTS 89 INCH LBS.IF STILL LEAKS OUTLET HOUSING COULD HAVE CRACK IN IT CAUSING LEAKING. i just need to no where the water pump is located on 97 buick ...

...97 jetta. I had replaced the thermostat only a couple weeks prior to my car suddenly over heating, and bad too. For me it could have been a couple reasons I thought that it was my head gasket and ...

Replace termastat 97 tracker 4 cylinder follow the upper radiator hose to the piece on the engine where it connects. this is the thermostat housing. remove the housing clean both surfaces replace the ...

...97 cavalier with a 2.4 Follow the top radiator hose to where it connects to the engine, there should be a metal removable housing there with the thermostat inside. Be sure to replace the gasket after ...

...97 Hyundai Lantra. Temp gauge shows engine getting hot, but turn engine off for bout 10mins, cools down very quickly. Both radiator & A/C fans running properly, changed thermostat, its not using any ...

...replace it. Have you ever drained all the antifreeze and flushed the system? Good time to do both. If the hose's get real hot that doesn't really mean the thermostat open. Wouldn't they get hot even ...

...97 Chevy c1500 5.7. It just started misfiring #1 cylinder and is running hot. Replaced plugs, wires and thermostat. no help. Electronic ignition. Where should I look? Do a compression test...may be a ...

...97 Subaru 2.5. I have a over heating problem. No leaking of fluids. The water in the coolent doesn't seem to be circulating. Could the thermostat in the closed position be causing this? Could the ...