Tacoma. This typically involves removing bolts, screws, or clips. Ensure that you support the bumper to prevent it from falling during the removal process. Prepare the new bumper: Unbox the new bumper
...is the case, you either need to drop the tank, or remove the bed to replace the sending unit assembly. I have done it both ways, but have found that removing the bed is easier than dropping the
Need to determine where the fuel filter is located. Also, how to get to and possibly replace the fuel pump. To remove the fuel pump, you need to either drop the fuel tank or remove the bed. The pump ...
...Tacoma 4x4 was wrecked and sat up for a while. It was running last fall (2008) and now that I have all the parts it will not start. Getting fire, but no fuel. After checking fuses discovered the EFI ...
...tacoma Inside your truck bed at the rear corners there will be 2 holes at the top and bottom of each tail light. Check to see what type off screw driver is needed probably Phillips head like this (+) ...
...Tacoma also wouldn't open, but none of the suggested fixes worked. I found out that the metal housing on the driver's side latch mechanism had bent or warped enough that the lever that ...
brakelight problem When I turn my headlights/corner marker lights on all 3 of my taillights come on, when I depress the brake pedal the license plate lights come on also. If I have the door opened and
Question about Toyota 4Runner
...TACOMA DELIVERY TRUCK. I'M GOING TO BE DOING THIS TEST HERE SHORTLY AND I WILL LET YOU GUYS KNOW WHAT I FIND OUT. I also tried the removing the gas cap. It actually worked the first time. Then a few ...
Question about Toyota 4Runner
How do i remove a stuck oil filter that my oil filter wrench won't loosen? If you have the space, you can drive a large screwdriver into the filter and use it as a pry bar like a tire iron.
490 questions posted
Usually answered in minutes!
676 Questions
427 Questions
430 Questions
361 Questions
348 Questions