1996 Toyota Land Cruiser "change low beam light 1991" Questions

...change the low beam on the headlight of a toyota landcruiser 1991, drivers side. Do I have to take out the elecric fans to change the light. Can the whole sealed beam be taken out from the front? you ...

and back blink very dim.i changed bulbs trying to fix.it didn`t help .1991 corsica need solution I have a 91 Chevy Corsica that only had low beams. I had to change the dimmer switch to fix the problem

...low beam headlights won't work but high beams work fine. I changed the bulbs and it still doesn't work My low beam headlights won't work but high beams work fine. I changed the bulbs ...

...1991 f150. Parking lights turns & stop all work. No head lights. I changed the dimmer switch...Nothing. The bulbs are good. Is there a fuse and or relays for low beams?... -RR81 check plug to dimmer ...

...on low beam then all lights work but changed to hig beam tailights go of again I can not get this and were is the daylight module located in wrangler 91 Brgd from Iceland check relay for ...

...change it from high to low assuming my problem lays in the steering column I've checked and everything looks fine.... Next idea was to check the headlight relay which I cannot locate, I've checked ...

...all that is good, the ALTERNATOR IS doing its job, yes, the regulator is inside the alternators and changes voltage , by SENSING batteries needs, and sensing driver added loads, (accessories) so if ...

...change both bulbs. Check first each low-beam, unplugged of course with a ohm meter to confirm.  I favor those bluish bulbs, got mine at Pep Boys (Pilot brand?).  You can see better with ...

change the headlamp bulb on the driver's side? What steps need to be done? Hello first start by opening your engine hood rite behind your head lamp pot is a plug socket simply twist counter clock wise

...switch , the tail lights , running lights , and all other lights come on except for the head lights . I have changed the light switch and checked all the fuses . Check your high/low beam