1995 Toyota Land Cruiser "mountaineer cv joints" Questions

Need tire size for 1995 Toyota Land Cruiser Prado I have a 1995 Toyota Land Cruiser Prado. I currently have the Goodyear Wrangler MT/R tire size is 245/75R16. My question is: Can I go to a 265/75R16 ...

...cv axle on my 97 mercury mountaineer? Its an all wheel drive and I'm removing the front driver side axle. remove the brake caliper and rotor then undo the axle nut and disconnect the lower ball joint ...

mountaineer, has a rattiling sound in the front driver wheel area, its not the steering nuckle, sway bar, ball joints, cv joint, i have replaced all of those, i have also checked my brake calipers and

when you turn left or right you get a noise like the cv joint is bad Have an alignment shop look over you car and give you an estimate for repairs. Sounds like you are correct about the bad CV joint ...

...mountaineer i have replaced front wheel hubs and both front sensors truck seems to loose power sometimes also turning to right hear agrinding noise check rear wheel bearings for condition and ...

CV joints Hi, Whilst potentially this could be related to worn ball joints - usually more noticeable over rough ground - the clicking like you describe is also typical of worn CV joints on the drives.

...Mountaineer is making a noise which seems to be coming from the front end. I can feel it in my steering wheel when turning. I just replaced the passenger side hub bearing, but it is still making the ...

...mountaineer it makes a squeaking noise inside and a clicking noise outside Not sure about the squeaking noise, possibly the rack-n-pinion or a dry seal. The clicking is a CV joint or joint in the ...

Clicking noise from CV joint drive shaft on 98 mercury mountainer Hi Steve you need to replace the joint before it breaks up and leaves you stranded somewhere. Regards Jim...

1999 explorer, when in a pull or in the mountains it makes a grinding, thumping noise chk the drive line "U" joints and cv joints for the axles