1995 Toyota Celica "not start" Questions

...not start. It will not even engage the starter. I leave the clutch pushed down and start to turn the key off and on til it will start. I have no idea where to start looking for the problem. neutral ...

not start intermediatly. Turn off ignition go shoping & return. Does not start. I try several times, no dice! After 10 or 15 minutes, it starts! Dealer shop says it most likely is starter. However

...the car was running. Parked the car to go shopping, when I returned to the car, it would not start, jump started the car but the battery would not hold a charge after the jump start. test please ...

...start my car it starts some time and some times it dose not engines, 101 No year, stated, , no country , nor engine, SSDD. they crank then start then run. (sustained , no stalls) 1,2,3, so what does ...

not start does not start Was it running before you replaced the timing belt ? Did you verify the timing marks are in the right place after installing the belt ? Does the engine have normal compression

...not start drove car to destination, car was stopped for about one hour. went back to car it would not start. Turning over real fast but will not start. now it only spins when trying to start Sounds ...

start fluctuating -downward, but jumping around a bit while they drop- and she starts chugging and sounding like one or two cylinders are being missed. If I press on or try to feather the gas, it gets

...not start or attempt to turn over at all. We have tried jump starting it, without any luck. I was thinking it could be the clutch although i dont know too much about cars. Any ideas why it wouldnt be ...

...start--rolls over --does not continue--bad solidoid ? Bad Start switch? Help if it turns over not the starter or switch check and see if it is getting fire pull plug wire put screwdriver in it with ...

...not start back up? So I started my 1992 celica up fine drove a little way then it died. It didnt seem like it was getting enough gas. But then I went to start it back up and it would crank but not ...