1994 Toyota Pickup "high side port leaking" Questions

Ad

Question about Toyota Pickup

1 Answer

...high pressure hose and suction hose for a 94 toyota 4X4 22RE 4 cylinder I'm assuming you are asking about the air conditioning hoses. If you are trying to add refrigerant you need to put it in the ...

Ad

...side pressure when adding refrigerant to see if it's too low or too high. 2) if in the proper range check again in a few days to see if the pressure is holding and you don't have a leak that requires ...

Ad

aprrox 1.75 lbs with proper gauge (28 ozs). Leak points are many, low side port ,high side port, high and low cut off switches,evap inlet,compressor manifold,condensor inlet and outlet...to name a few

...high pressure side. Do not try to recharge it unless you are 100% sure. If you are needing to recharge the system then it has a leak that needs to be repaired. It is technically illegal to add ...

Question about Toyota Pickup

1 Answer

high side port leaking I have a 99 Silverado which I was just charging with 134 when I noticed the high pressure port was leaking. Can I replace the port or the valve core myself or is it a big deal? ...

high-side fitting is the largest and special couplings are required to connect service equipment to both the high-side and low-side service ports. Refer to Special Service Equipment as outlined. Quick

high side port just beside radiator on passenger side and low side port is located on the accumulator right next to clutch cycling switch low side freon port is one the recieverdrier. passengerside>

...high pressure side .. the large tube is the low pressure side ... follow the large tube back until you find a cap that covers the low pressure port .. thats where you would fill with new refregerant ...

...side port, it will not fit on the high pressure port. Be careful not to over charge the system, and if you need to recharge it again with in2 weeks then you have a leak then needs to be addressed and ...

high side. You NEVER want to charge from the High Pressure side. The low pressure charging port should have a black cap on it and should be found on top the the receiver/dryer, a bottle-looking device

Not finding what you are looking for?
1994 Toyota Pickup Logo

1,330 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...