Question about Toyota Land Cruiser
how do i manually unlock 4 wheel drive on a 2005 dodge dakota is in 4 low wont disengage with switch? drive in forward hit 2 wheel hi put in reverse drive a couple feet put in drive
...4-wheel drive, the front drive shaft turns but the front wheels do not move. What could be the problem? You probably have blown drive hubs. Do you have to engage the hubs at the wheels? If not and ...
Question about Toyota Land Cruiser
...4 wheel drive is engaged, but only on the drivers side. Vacuum line? cv joint or u joints? sure could use some advice. im new to the toyota world and wanting to gain more knowledge on the set up and ...
...4 wheel drive. If that is the case then yes cause when your in two wheel drive mode the front is in neutral With independent frond 4 weel drive differentials it would be normal for the axles to spin ...
...4 wheel drive will not disengage You might want to check the gear selector switch that is located on the driver side of the tranny, if the 4x4 is electric and not manual for engagement, selector must ...
...4 wheel drive it still drive in 4wd how do i fix this problem if it has automatic lock in hubs only!! start truck, put truck in neutral, push button for 2x2 shift into reverse,back up 5to 10 ...
...of course)..... I had an older ford pickup which did the same thing.....disengaging the hubs and just yanking the shifter had disengaged the 4 wheel drive then I was able to put it back into 2wh
Question about Toyota Land Cruiser
...4 high 4x4 to 2 wheel drive on dirt? off road or on the road (pavement) on ice? do say what the tires are touching. we cant see you drive. this car has parttime 4wd, its not AWD nor full time 4wd. ...
...unlock by itself at low speed (i hear strange sound...) Finally i was unable to put the system on 4 low even if i force it. That do a lot of noise like if i grind a sprocket...Can you help me? ...
364 questions posted
Usually answered in minutes!
279 Questions
212 Questions
172 Questions
141 Questions
160 Questions