...clutch? or would it be something to do with the gearbox?Its for a Toyota Hiace Van 2.4 ZL series, petrol. but you dont have that model listed. try changing the gear / transmission fluid first, this ...
Question about Toyota Corolla
...hiace 3L with new head water pump,radiator,clutch fan,thermostat,radiator cap,fuel filter,new timing belt and it over heats after 100 km and has blown the cylinder head gasket twice since . any ideas ...
how do i bleed clutch 2002 zx toyota hiace van replaced slave and master clutch cylinders on my 2002 toyota hiace van but it wont bleed up I have a 1995 hiace bus where do I bleed it from
...clutch fluid on a Toyota hiace 1997? On my Toyota hiace 2,4 petrol 1997, the clutch comes up with difficulties and I have to pump the pedal to change the gears. That happens suddenly. I would like to ...
Question about Toyota Corolla
...clutch plate in toyota hiace van 2004, bled the clutch but the clutch releases itself when i puch clutch to floor ihave changed clutch plate in van bled the clutch but when i push my foot down the ...
...foot of pedal 1997 hiace commuter van and have bled it but the clutch releases while pedal is all the way down pedal plunger is bleeding off pressure or the clutch cylinder is bad..replace
Question about Toyota Corolla
...hiace diesel van clutch slipping. Are brake and clutch fluid the same? Cheers Yes they are the same . Check that the master cylinder is operational as a slipping clutch can be a blocked compensating ...
location of clutch reservoir Toyota hiace 97 model Clutch reservoir is right along side the brake master cylinder on the firewall under hood. Just like the brake, it's actuated by a rod from the pedal
...hiace first gear very hard when changing Changing gear very hard 1st an revers hi it can be the clutch is not totaly disengageing i dont know the year of your hi ace check the hydralic oil for the ...
hiace changed the complete clutch kit but whether in gear or not when i press the clutch pedal in its quiet br when i release it theres a grinding sound hi there it is more then likely the bearings in
1,234 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
767 Questions
792 Questions