1994 Toyota Camry "starter plunger" Questions

Ad

...copper ring shaped contact on the plunger of the starter? If so where can I buy one? 1995 Camary starter contacts. Your local parts store should carry or even get you these under a brand named

Ad

starter motor. I was able to replace the copper contacts and plunger on the solenoid for $26 in parts. Parts received in 3 days from Nations Electric online. I have done this repair twice now, once on

Ad

Question about Toyota Camry

1 Answer

...starter and then remove the cable so that it hangs loose, then unscrew the retaining bolts holding the soloniod....Once this has been done, lift the unit upwards from the housing so that the plunger ...

Question about Toyota Camry

1 Answer

...starter plunger & both contacts would haved solve the problem. Regarding the replacement starters, I have observed many times that "aftermarket/rebuilt" starters are, at times, just as bad as the one ...

...starter housing and pull the plunger (2) out away from the solenoid. Tip the solenoid and insert the lever into the loop, push the solenoid against the housing. Install the solenoid bolts and tighten ...

Question about Toyota Camry

1 Answer

...starter; replace the plunger and the 2 copper coloured contacts) OR reeplace the starter. The clicking noise that you hear is the plunger hitting one contact, but the current from the battery is not ...

Question about Toyota Camry

1 Answer

...Do not lube the plunger body as it attracts dirt and dust and gums up the starter assembly again really quickly. Reassemble, remount the motor, reconnect the cables and reconnect the

Question about Toyota Camry

1 Answer

...starter from the vehicle, Remove the 3 small bolts that retain the cap on the solenoid side. Remove the solenoid cap, then the plunger. Examine the plunger for burnt marks, inspect the contacts that ...

...starter solenoid. The plunger is acting but the Starter Solenoid Contacts are burnt. In some cases we replace the solenoid contacts and the plunger. All have 1/8" thick copper contacts. The other ...

...starter from the car. Then remove the access plate on the back of the solenoid (3 8mm bolts), take out the plunger and spring. From there you can see the copper contacts, and how they have worn. ...

Not finding what you are looking for?
1994 Toyota Camry Logo

2,444 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1998 Toyota Camry
1998 Toyota Camry

1,565 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1996 Toyota Camry
1996 Toyota Camry

1,134 Questions

1997 Toyota Camry
1997 Toyota Camry

1,141 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...