...rear brake caliper on 2002 toyota mr2 i have replaced front by useing channel locks no problem--but rear brake caliper will not compress. Is there a special tool required. I saw a tool online looks ...
...rear caliper piston in (Parking Brake Adjuster) Looks like cube If it doesn't fit, file a little off the pins you choose to use Open bleeder valve,it will be easier & you still have to push ...
...rear brake pads, can't get handbrake adjusted properly you need to get under the car,if you have a pit all the better.two belle pans have to come off its a 10mm spanner and a screw driver to do the ...
...rear brake calipers on 1993 Toyota MR2... you have to remove the the wheel of course and take 2 bolts out of the back of the calipers, one top and one bottom. once they are out you should be able to ...
...rear brake pads on my 1992 mr2 gt Parts needed... Metric socket set. Large standard screwdriver and or small pry bar never-seize lubricant new brake pads 12" channel lock pliers or a caliper piston ...
THE REAR BRAKE CALIPER PISTON NEED TO BE COMPRESS IN ORDER FOR THE NEW PAD TO FIT HOW TO DO IT You have to kind of screw it in and press it at the same time.
rear brake pistons back in to get new pads in. Tried turning anti-clockwise but very stiff. if they are turning type try clock wise and if worst comes to worse crack open the line and then bleed them,
Rear brake pad replacement, can't get caliper to compress down. I have gotten the pads out no problem and can get the new ones in just fine, but I can't seem to figure out how to get the caliper to ...
rear wheel. it breaks free but if i back up it like winds up and gets tight. its a 92 mr2 and this started after a 600ml trip. this vehicle caliper system has the emergency brake made into the caliper
74 questions posted
Usually answered in minutes!
231 Questions
106 Questions
71 Questions
76 Questions
60 Questions