1993 Toyota Corolla "front struts" Questions

...front end, otherwise the car will not steer or track properly. Over all, this is a major job. These are not shock absorbers, as you would know them, but are called McPherson struts. If you would like ...

struts on a 1997 Toyota corolla, 1.8, automatic trans. Within a year the front pasenger side strut blew, and I replaced it. Within the next year, both struts on the passenger side blew. Now I don&

...front struts at top where it connect into engine compartment I was looking inside the tire wells and noticed the boots that cover the top of the struts is torn. What should I do? Replace them... the ...

need to replace 2003 corola front wheel bearings. need step by step instruction please Removal & Installation To Remove: Remove the front wheel. Remove the front axle hub nut. Disconnect the front

...struts on my 2003 Toyota Corolla. Removing the large bottom bolt is easy but how do I access the top part of the strut?? You will have to remove the rear seat.Go to the bottom cusion in the front and ...

...front struts. have a trusted technician inspect the front end.? My next question is what are the parts that make the front struts? or if the front struts are a parts itself. Which part of the front ...

...front and rear struts You can buy preloaded struts meaning new springs and struts and upper bearing caps already together so all you have to do is mark the old position with chalk on the bottomand ...

... u will also need a front end alignment which will add about another $100 to the job. Shop around fopr the best price, use Monroe brand struts, they are good quality and priced lower than factory ...

...can do this yourself, but you need a good spring compressor and a tie rod end separator tool.The front shocks are integral with the suspension strut and spring, and come out as a unit. Then you ...

...front wheel drive cars) use struts, which require more work than shocks. You will have to take apart a significant amount of parts to get to the strut, and then you will have to get it aligned when ...