1993 Toyota Corolla "1 engine bolts" Questions

Ad

Question about Toyota Corolla

1 Answer

...1.Drain engine coolant 2. remove right hand engine mounting insulator 3. Remove #2 and # 3 timing belt covers 4. Remove front engine mounting insulator as follows a. remove hole cover b. remove the 2 ...

Ad

Question about Toyota Corolla

1 Answer

...Engine under covers 1. Before servicing the vehicle, refer to the Precautions section. 2. Remove or disconnect the following: Negative battery cable Front engine undercover Starter wiring harness ...

Ad

...1 bottom bolt from the starter of my '89 Corolla Wagon. Where is the location of the second nut or bolt? Thank you very much! Seems I recall one of the bellhousing bolts ,it goes in 90 degrees ...

...to 1/8 in. of play in the belt, tighten the lock bolt and the hinge bolt, and run the engine. If the belt squeals it means you need more tension, but do not overtension. Recheck it after a few

...1: Exploded view of the oil pan assembly-4A-F and 4A-GE engines 3.   Drain the engine oil into a suitable container. Fig. 2: Remove the oil pan drain plug to drain the engine oil ...

...1.The Drivers side of the engine is the Left side. From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7. From the Front going towards the back on the Passenger side; the ...

Toyota corolla cylinder head torque specification 1.6i 3zz engine Cylinder head bolts are tightened in three stages: Stage 1. 25 Nm. Stage 2. 49 Nm Stage 3. Rotate each bolt 90 degrees in a sequence.

...engine coolant. Remove the right lower splash shield. Remove the drive belt Remove the 6 water pump mounting bolts. Remove the water pump and O-ring (except XRS). Using special tool 09960-10010 or ...

Question about Toyota Corolla

1 Answer

1. Write down the code of your radio if it has anti-theft device. 2. Open the engine compartment. 3. Remove the negative terminal of the battery. 4. Remove the alternator electrical plug or connection

Question about Toyota Corolla

1 Answer

1. Disconnect the negative cable on the car battery before you begin. 2. Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan. 3.

Not finding what you are looking for?
1993 Toyota Corolla Logo

1,039 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

2003 Toyota Corolla
2003 Toyota Corolla

1,240 Questions

2005 Toyota Corolla
2005 Toyota Corolla

1,236 Questions

1994 Toyota Corolla
1994 Toyota Corolla

819 Questions

1996 Toyota Corolla
1996 Toyota Corolla

767 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...