tighten down the mirror on the base? With my 4 runner, I had the same problem. All I needed to do was use a phillips head screw driver and tighten up a screw that is underneath the mirror housing. i.e
...mirror inside housing is coming loose how do I tighten? On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the ...
Question about Toyota 4Runner
mirror flops back and forth. Can I repair it (tighten it) myself internally without having to take off the door panel or replace the entire mirror? I would unscrew the 3 screws and take the mirror out
...mirror loose how do i tighten it Most mirrors have a removable cover just on the inside of the door. If you look closely where the mirror meets the door on the inside should be a snap in place cover ...
Question about Hyundai Cars & Trucks
...it? May have to pull inside door panel to do it. Check with hyundai Remove inner door panel then remove panel behind mirror. Tighten the 3 bolts holding the mirror to door. Put door back
...mirror bolt. To install, tighten to 11 Nm (8 lb-ft). If equipped, remove the exterior mirror screw. To install, tighten to 2 Nm (18 lb-in). Remove the exterior mirror. To install, reverse the removal ...
...mirror assembly. Tighten this screw about 1/8 turn and it will keep the mirror from moving around. If you remove the screw you can remove the mirror and drive motors. Use a bit of thread-lock to keep ...
...drivers outside rear view mirror is loose in the swivel mount, it is a powered mirror. How do I tighten it up? It is a 2000 Dodge Grand Caravan look under the covers and their is either a screw or a ...
...will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a screw driver in and tighten the screw on the inside to secure the
...i've priced replacing the mirror bu its not broken, just loose. Oterwise the ca is in excellent condition-maintained well. take the iner panel off then re move screws then mirror, tighten ...
495 questions posted
Usually answered in minutes!
676 Questions
427 Questions
430 Questions
361 Questions
348 Questions
