1993 Toyota 4Runner "change rotors truck" Questions

Brake Vibration Had my brake pads changed and roters turned. Now I have a violent vibration in dash and sterring wheel when trying to brake.. Why? Your front rotor's were no cut right, there wrap so ...

...rotors on front and it appeared to help the grabbing somewhat, but the noise is still there. Can't pinpoint where noise is coming from exactly, but sounds like right down middle of truck. Any ideas? ...

I'm trying to replace the rotors on 2001 Tundra. Calipers are off but rotors won't budge. medium pounding all the way around but they won't budge. Thanks for choosing FixYa and welcome to the site. ...

cranks, no spark. Changed coil and igniter Have you also checked the distributor cap and rotor to see if they are working properly. If the connectors inside the distributor cap and rotor are not ...

...rotors have to be replaced when replacing the front brake disc pads? They both look and feel smooth. I have a 2004 Toyota 4Runner with 69K miles. This will be the first time the pads are being ...

Number 6 of a 3.0 does not fire changed plugs, wires, cap, and rotor.No change. Then changed #6 fuel injector still no better. It also consumes more gas than usual. After changing the injector it ...

dash board light came on, says ETC PWR? I just tuned up vehicle, plugs wires, rotor cap, rotor. after 2 weeks, light came on, started running rough? 1992 toyota 4runner, 6cyl. 4by4, auto trans, "ETC ...

1990 toyota fore runner SR5 changed plugs /cap/rotor/wires.now the truck is bgackfiring . you messed up the ign timing If plug wires are routed correctly Adjust timing to specs.

Camshaft torque specs on a 1992 Toyota 4runner Hi there:The camshaft position sensor is installed on the front of the right cylinder head of the 5VZ-FE engine. The timing rotor has been integrated ...

...change front Brake rotors on 91 4runner. How do we remove them? Remove the wheels and the two bolts holding the calipers on.the rotors may be rusted in place if they are knock-offs so u will have to ...