1992 Toyota Celica "remove cylinder head 2001" Questions

...area on the cylinder head. Not something that I would fool with if you have no experience removing the cams. Best left to a professional. Unfortunatly, quite a common problem, I have done 6 this

...Remove cylinder head cover bolts, cover and gasket. The gasket may be used again. To install: 1. Position the cylinder head cover gasket onto the head rail. 2. Position the cylinder head cover onto ...

cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and

...cylinder head assembly and remove the head gasket. To Install: Clean the engine and cylinder head sealing surfaces. Install the new gasket on the engine with the identification mark facing up and to ...

...cylinder on the compression stroke (both valves closed) remove spark plug and make sure the engine will NOT turn over !!using a compressor and sparkplug adapter fill the cylinder with air which will ...

how do i remove the crank pulley on my cruiser to remove the cylinder head Be more specific. The crank pulley is not on the cylinder head.

...LEAK AT THE INTAKE MANIFOLD GASKET OR FUEL INJECTORS SEALS LEAKING THEY HAVE TO BE REPLACED IF YOU REMOVE THE INTAKE MANIFOLD AND CYLINDER HEADS IF YOUR CYLINDERS HEADS BEEN SHAVED COMPRESSION

...compression on all 4 other side. Ideas? That is an overhead cam engine - a separate cam on each cylinder head. Remove the valve cover on the side with no compression and see if the cam is

...plugs to cut new threads, and put a threaded insert in for the new threads. These aren't extremely expensive, but you still need to remove the head so you don't get aluminum shavings in the

...the cylinder heads. over time, they weld themselves in the cylinder head. changing the spark plugs is the first step, that is, if they can be removed without damaging the threads in the cylinder