1992 Toyota Celica "fuel gauge problems working backwards" Questions

fuel pressure gauge and test the pressure. I'd start with a complete check of all your vacuum lines. Check for cracks on the vacuum hose that connects to fuel pressure regulator on the fuel rail. Also

...fuel gauge assembly gauge not working here is the short version there is a sending electric wire on top of the tank and a grounding  wire on top of tank either lower tank or loosen up bed to ...

...fuel pressure gauge. Your pump may be working but may not be working at the correct pressure. I wouldn't start just throwing parts on it as that can be expensive and you still might not fix it. ...

fuel, or oil in the radiator fluid,just exhaust stuff floating around in the coolant.There is water coming out of the muffler,so i know that portion of the head gasket has a break in it.It seems to be

...Gauge fuel gauge radiator fan also, when plugging relay in to blower motor it constantly runs. Everything else works, we need this van for transporting our wheelchair bound son. Any info would be ...

...fuel pressure gauge available at Autozone for around $40. A TPI motor needs at least 40 psi to operate properly. Back to the regulator, if it is in fact the problem your going to have to replace the ...

...gauge and now it wont run at all. Starts. but won;t run. Just because a computer is re-programmed does not mean it does not have an internal fault. The question really is who diagnosed this in the ...

...fuel gauge does not work from replacing the alternator the first time. It sent it backwards. The car also sounds like huvercraft when driving with the rear windows open. IT is deafening. I only owe ...

gauge, listen for the fuel pump etc. check the fuel pump fuse.) 2. Is the engine mechanically sound? (Check compression, open the oil cap or remove the distributor cap and see if the camshaft is going

...gauge on the fuel rail and make sure the pressure doesnt die down Can you hear pump running? check for good power and ground at pump. Check pressure at port with guage needs 55-60 PSI to run. Does it ...