1991 Toyota Previa "check engine turn" Questions

...check engine" icon is lit the "check engine" icon is lit on my 92 toyota previa First verify that battery is fully charged (>11volts), the throttle is closed, the transmission is in neutral, and all ...

check engine I did the old paper clip trick to check the code, because my oil light has been on, for a while, I know it needed something but not sure what, not the check engine light came on, so thats

...the engine check light with all the other warning lights. If not open the hood and replace the ECU fuse nod then try again. If you see the light, let us know and we can go on from there. Regards ...

check the engine oil level for previa 2.4 petrol 1995 OIL LEVEL CHECK Every time you stop for fuel, check the engine oil as follows: Park the vehicle on level ground. When checking the oil level it is

...a diagnostic tool that will be able to read your codes that are throwing the Check engine light (CEL). That way you will know what needs fixed to turn off the CE. Once fixed, the CEL will turn

ENGINE CLATTERED AND WOULD NOT START AGAIN. IT WILL TURN OVER BUT DOESN'T EVEN TRY TO START. WE CAN SMELL GAS WHEN WE TRY TO START IT AND THE STARTER WILL ENGAGE, BUT THAT IS IT. CAN YOU HELP? THIS IS

...engine turns over, has spark and fuel but is not firing - what do we do now? finding it really hard to find a manual! Do a compression test to check for bent valves Check cam shaft position sensor. ...

...engine, and let it cool down before removing the radiator cap, then check for air in the system, topping up as needed. The radiator needs to be full to the top. Also check the overflow reservoir, ...

check the levels,,,, of fluid. ATF. my guess. is the engine races real fast and car dont move, right, this is called transmission slip or FLARE. there are 2 issues, here, no engine power, RPM very low

Engine turns over but no spark detected from leads Coil Assy checked out ok, and immobiliser disconnected but still no spark either the crank sensor or ignition module