1991 Toyota Camry "relay starter" Questions

starter relay switch not working I just bought a 1991 Toyota camry le, when I purchased the car I was told I would need to buy a starter relay, the seller had attached a Dimmer relay in place of where

starter relay where is a starter relay in camry 88 3s-fe engine there?. i checked one in engine fuse box and driver left kick panel - nothing! I could not find one on my 1988 Camry either but if I ...

...starter relay on a 1990 Camry with 2.0L 4-cylinder and automatic transmission? There is no starter relay on the 1990 camry 4cyl . If you check the fuse panel by the drivers left ankle you will see ...

...starter relay) Just becaue its new, don't mean its good or fully charged. If you remove the starter switch lead (small wire) from the starter relay and apply +12v from the battery to its respective ...

...starter relay? i'm leaning towards the relay. what do you think? it the solenoid i had the same problem It may be the relay. The relay can make a clicking noise. But, if your ignition is sticking, it ...

starter relaY LOCATION wHERE IS THE STARTER RELAY location of relay starter switch on my 2003 toyota camry it is a little black box on the drivers side to the left of the steering wheel and under the ...

starter relay on a 1991 camry new starter no start condition 12v at trigger wire at starter The starter relay is on the starter housing and is part of the solenoid. If you have 12v on the trigger wire

...starter relay It is under the hood on the driver's side in what Toyota calls Engine Room J/B No.2. Here is a diagram that shows you the location of the jumper block Look at this diagram of J/B No. 2. ...

starter relay or even the starter. I have had both happen on these cars. a less common problem would be the ignition switch. The starter relay is easy to replace, it is under the hood in the fuse box.

...relay either starter or ignition unfortunately relays cannot be tested you just have to replace them and see if it fixes the problem relays are located in fuse boxes. If replacing the relays doesn't ...