1990 Toyota Pickup "22re valve cover" Questions

...valve cover my 1990 toyota with a 22re 4speed has vacuum pressure in the valve cover.While the engine is running and you remove the oilcap, the engine will stumble and almost die.You can feel the cap ...

...22re valve cover gasket In addition to the acorn nuts holding the cover down ... you'll need to remove any hoses, etc that prevent you from lifting the cover. You might as well do the PCV valve while ...

my 1984 toyota 22re builds presure in the valve cover is this normal if it isnt what would cause it check pcv valve

22RE the oil pump is on the timing cover behind the crank pulley/harmonic balancer,it has the crank timing pointer built onto it,generally they don't leak around the pump seal but as Monster80 pointed

...22re from autozone.com ADJUSTMENT 22R and 22R-E See Figures 3, 4, 5 and 6 Start the engine and warm it up to normal operating temperature. Turn the engine OFF . Remove the air cleaner and housing, ...

...22RE. Loss in oil pressure, timing chain is really got a lot of slack in it. Got 197,000 miles on it. What might be the solution of fixing? The soulution is probably going to be expensive. It sounds ...

...22re and had a ticking noise coming from the rear of the head when i had gotten it all put back together. after adjusting all the valves the ticking noise was still there. i had the head rebuilt and ...

...22re 4wd 5spd when it first starts it makes a loud clacking noise that goes away after a few seconds what is that noise my rocker arm shafts and rocker arms are in good condidion Sounds like it could ...

...22RE. Exhaust in coolant, coolant in oil, daughter started it ran 10 minutes now won't start only clunks. Any suggestions for diagnosing at home? Do not drive the truck any more you have a blown head ...

22re there are many ways. (ill assume the damper pulley marks are ok) 1: valve cover off, watch valves #1, all closed at mark is TDC firing. 2: with cam cover off, front of engine watch the marks. per