Question about Toyota Corolla
...torque setting for head cylinder on 1994 toyota camry 220se Torque the cylinder head bolts in three stages as described below: 1st stage = 25 NM. 2nd stage = 49 NM. 3rd stage = Rotate each bolt ...
cylinder head 2.4 torque I need to find out the tightening sequence and torque settings for a2003 toyota camry 2003 cylinder head step 1 58 ft lbs.step 2 additional 90 degrees
Question about Toyota Corolla
...cylinder head, conrod and main bearing torque settings for a toyota camry 2L,1996 model. -Always follow its repair manual. Never trash any body. -Good mechanic always did. doesn't matter how many car ...
torque settings INSTALL CYLINDER HEAD if any bolts broken or deformed , replace it. 7------2-----4--------6 5------3-----1--------8 FRONT sequence head bolts 8-------1-----3-------5 6-------4-----2---
...torque wrench for redoing the cylinder head bolts......and definetly a must, a manufactureres manual for all the torque settings, and step by step instructions shoudl you need them. I would only ...
...cylinder head with a torque wrench. Twist the spark plug wire boot loose then pull it off the plug. Inspect the boot for damage and replace it if necessary. Blow into the spark plug with compressed ...
Question about Toyota Cars & Trucks
...cylinder; it put out 156 hp @ 5600 rpm and 160 ft.lbs. of torque @ 4400 rpm. The design of the motor is basic Toyota from the 1980s, with cast iron block, a one-piece main bearing cradle, aluminum ...
...cylinder block and add liquid sealant to the oil pump and the engine block. Put the oil pump back on the engine block. 9 Add and tighten the bolts over several passes, keeping the torque even. The 10 ...
...torque: For older style 10mm head bolts : 35 - 45 - 45 - and a 1/4 turn; For newer style 11mm head bolts : 45 - 65 - 65 - and a 1/4 turn 3. Use the two rubber valve cover end seals and a bead of RTV ...
725 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions
