1990 Toyota Corolla "replace exhaust manifold studs motor" Questions

Ad

...exhaust manifold and catalytic converter. Some models have an oxygen sensor, disconnect the oxygen sensor wiring.      Fig. 3: Remove the front exhaust pipe for better access ...

Ad

...exhaust gases that sounds like ticking. I'll also bet it's louder when the motor is cold. My research indicates that just about every motor like this experiences this issue. Design flaw allows H2O to ...

Ad

Question about Toyota Corolla

1 Answer

...exhaust manifold? I am replacing the motor. Thank You exhaust to cylinder head nuts 11 ft lbs exhaust to cylinder head studs 97 in lbs flywheel 22 ft lbs Please rate this a fixya if this answers your ...

Question about Toyota Corolla

1 Answer

replace exhaust manifold How do I remove and install exhaust manifold including torque specs. which engine.? 8v or 16v. the manifold unbolts, see the studs there. they are nuts acutally the trail pipe

...exhaust manifold and move the tube bracket away from the starter. Remove the electrical connections from the starter. Remove the bolts attaching the starter to the flywheel housing and the rear ...

Question about Toyota Corolla

1 Answer

...exhaust manifold. i know the valve cover gaskets needs replaced but i cant see where the leak is coming from, so i was wondering if it would be the head gasket or the freeze plugs. there is no anti ...

...REPLACE IT.. REMOVAL & INSTALLATION 2.0L SOHC Engine With Automatic Transaxle; 2.4L Engine Disconnect the negative battery cable from the left strut tower. The ground cable is equipped with a ...

Question about Toyota Corolla

1 Answer

...replace the O-ring. If removed, position the oil pickup tube on the oil pump and hand start the 2 bolts. Install the bolt retaining the pickup tube to the main bearing stud spacer hand tight. Tighten ...

Question about Toyota Corolla

1 Answer

...replace the O-ring seal on the thermostat housing. Position the housing and upper hose and install 2 retaining bolts. Torque to 15-22 ft. lbs. (20-30 Nm). Reconnect the heater water hose. Reconnect ...

...exhaust manifold where the r exhaust comes to the motor my exhaust looks like it just popped out of where it comes to the top of my motor. i think it was called a few days before when i hit a kerb at ...

Not finding what you are looking for?
1990 Toyota Corolla Logo

725 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

2003 Toyota Corolla
2003 Toyota Corolla

1,240 Questions

2005 Toyota Corolla
2005 Toyota Corolla

1,236 Questions

1994 Toyota Corolla
1994 Toyota Corolla

819 Questions

1996 Toyota Corolla
1996 Toyota Corolla

767 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...