...CYLINDER HEAD? PLEASE PLEASE HELP cylinder head bolts: step one: 22 Ft-lbs. step two: tighten additional 90 degrees step three: tighten additional 90 degrees I need the torque sitting for hino 2004 ...
...cylinder head 5AFE L touring. Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts. - Install the plate washer to each cylinder head bolt. - Using Torque ...
Question about Toyota Corolla
...cylinder head torque please ? torque setting for the cylinder head please Hi Manuel, There are a number of different engines used in the Corolla, knowing which would be a great help. The engines used ...
...Cylinder Head Torque: (a) Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts. (b) Install the plate washer to each cylinder head bolt. (c) Install and ...
Question about Toyota Corolla
...1.6 cylinder head bolt tightening sequence and torque specs please? All in this link https://www.google.com/search?q=1990+Toyota+Corolla+1.64+cylinder+head+bolt+tightening+sequence+and+torque+specs
cylinder head torque settings on a toyota corolla 1990 model ae92 wiht a 4a-fc engine Tighten in several passes to 44 foot pounds. I just wanted to add. Since this is an aluminum cylinder head, I hope
...cylinder head of 1zz Toyota corolla 140i Torque: - Connecting rod (big ends). Tighten bolts in several steps. 1st stage 29 NM, 2nd stage, rotate further 90 degrees - Main cap bolts (crank shaft). ...
...cylinder head I am changing the head gasket, and need the torque settings, it is a 1985 1600 toyota corolla 4A engine hey, torque must be done in 3 steps: 1st 22 ft lbs 2nd 43 ft lbs final 47 ft lbs ...
what are the cylinder head torque settings for a 1993 toyota corolla 1300cc Umiformilly tighten each of the ten head bolts in several passes, in the sequence shown. Tighten them to 44 ft. lbs. (60 Nm)
Question about Toyota Corolla
Toyota corolla cylinder head torque specification 1.6i 3zz engine Cylinder head bolts are tightened in three stages: Stage 1. 25 Nm. Stage 2. 49 Nm Stage 3. Rotate each bolt 90 degrees in a sequence.
725 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions