...spark plugs, wires and 1 and 4 cylinder coil and I still had a misfire. Then It threw a code po1300 ignitor circuit code. Not sure what the problem is all I have left to do is a cylinder leak down ...
...in the fuel pump harness but pump will not work. the coil has 12v present in harness as does the ignitor. the ignitor will not ground coil, i tried to do the pulse test but it would not groundthe ...
...Ichecked the fuel injectors there ok checked fuel pump works fine replace distributor cap and the ignitor but I dont get a spark at the sparkplugs.henrys check all efi and ign fuses first...then ...
no fire to my plugs I have a 1993 toyota camry 3.0 v6 with no fire. I have power to the ignitor and going to the coil but no fire is leaving the coil into the distibutor. I have replaced the coil, ...
fire to the plugs Could be anything in the ignition system. Cap and rotor, voltage to the coil, the ignitor, or the distributor. What have you tested so far
...to start dies out 1996 to toyota camry le replased fuel pump, plugs, wires, crank sensor, coil, ignitor, radiator, temp gauge should replace fuel filter along with the pump, did
bad igniter where is the igniter located on a 1998 camry v6 xv20 ? USA> all answers by me , USA. so.....???? guessing? why not post symptoms,???? does car have an Immoblizer, and if yes, is it ...
92 camry 2.2 liter 5S-FE I'm trying to determine what voltage I should see going to the ignitor with the key turned on? bert the same as our battery if you dont that mean corroded wire check it out ...
1993 Camry 300sei v6. Spark from coil to distributor but no spark on plugs. I have replaced the ignitor with no results.Can the immoboliser be at fault? is your ignition coil is OK?if fine , do you ...
code reads p1300 Ignitor malfunction intermiten - means nothing what kind of problem are you havenwhat kind of car - make - model - year ????
911 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions