Question about Toyota Camry
When I hit the brake pedal, the passenger side brake light does not turn on and the dashboard brake indicator illuminates. Now the brake lights do not turn on when I hit the brake. The problem ...
When brake is applied,the rear light on the panel come on. However, it also appears I have no brakes at all unless applied very hard. It also appears that it could be an electrical problem. 1990 ...
how to change brake pad and check rotors Brake PadsRemoval & InstallationFront To Remove: Drain brake fluid to ½ full level in reservoir. Remove the front wheels. Remove the front brake ...
and add as necessary using only brake fluid from a sealed container. If the fluid was low check the brakes. Low fluid can indicate a possible leak in the brake system or worn out brake parts
...air filter, as far as your brake's sound like there a little worn, which is normal, have your rear brakes adjusted, that will bring the brake peddle up, there's no front brake adjuctment, lots of ...
locked gearshift, no brake lights The gearshift is locked up so I have to push the button down in the console to put it in drive., Also, I have no brake lights. I think all this runs off the same fuse
...brake servo assist system and you are only getting 50% or less assistance when you are applying the brakes. You need to have the vehicle checked out without delay because if you lose brake assistance ...
...brake fluid only!!!! The light should go out. The next thing to do if this is the case is check the brakes. Low brake fluid is a good indicator of either the brakes getting worn out or a leak in the ...
no break lights in 1991 toyota camry Look above your brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you ...
335 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions