replace wheel stud on 88 corolla? front driver side you will have to take the disc and caliper off too. Then put the wheel nut back on, screw the nut until the top is level with the thread on the stud
replace the bolt? Remove the tire, and the brake drum. With a suitable punch, and safety glasses on, drive the broken stud towards the center of the car. The stud will push away from you, thru the hub
wheel studs you will have to pull the barke drum off and knock the studs out and should be able to get new ones in and use a nut and spacer to pull the new studs tight These bolts are called Lug nuts.
replace the wheel bearing since the bearing will be ruined when the hub is pressed out of it. You will need to remove the knuckle from the vehicle and bring it to either a machine shop or auto shop to
...replace and how? Easy. Take wheel and tire off, and remove the brake drum, if it has drum brakes. With a hammer, hit the broken stud until it pops out. Slide the new stud into the hole, and, using ...
replace my rear brakes on my Toyota Corolla 2002, but, how can I get the hub off. behind the hub on the backside is a slot on the bottom putting a screw driver in and working in and up and down motion
...wheel assembly apart, mainly the brake drum assembly, so that I can replace a lug nut stud and now brake fluid is pooring out from inside the drum assembly. How can I get this assembly apart? there ...
...replace 2003 corola front wheel bearings. need step by step instruction please Removal & Installation To Remove: Remove the front wheel. Remove the front axle hub nut. Disconnect the front ...
I Can't get front rotors off my 2006 Toyota Camry. On most camries you need to remove the wheels, then brake pads, and the calipers. Most camries do not use any screws to hold the rotors, thus when ...
239 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions