2006 Toyota Land Cruiser "remove back brake drum" Questions

...back of adjustment tension. Remove tension spring, using a suitable tool, then remove rear shoe hold-down spring and pin. Remove rear brake shoe and anchor spring, Fig. 7. On Land Cruiser models, ...

...back plate remove seal and replace. Simple job. Replace soiled shoes and lightly sand drum surface to clean. Beware - Toyota replacement Handbrake Cable DOES NOT WORK. The replacement part has a ...

...back.i have pressure bled system and now replaced master cylinder still spongy pedal??? there is air there somewhere. try manual bleeding the brakes. do the farthest wheel first. if they are calipers ...

...adjusting lever and you have left it off.drill a hole through backplate in line with adjuster and remove the auto adjuster,then when you service vehicle adjust through hole in back plate.simple is ...

remove the rotor. hammer the old one out then use the nut and spacers to pull the new one back in Generally lug bolts have small serated splines and are hammered or pressed in from behind. You did not

...Remove the access hole plug, then back off the adjusting screw Raise and safely support the vehicle with safety stands. Mark the relationship of the wheel to the axle flange to help maintain wheel ...

...REMOVE DRUM. This may not be the solution, however your park brake needs to be off so that the drums will be released. Chock the wheels before releasing the park brake you back the shoes off with the ...

...remove back brake drum on a 2002 dodge dakota pick up truck. Remove the rubber plug at the back of the backing plate. Take a brake adjusting tool or screw driver through the hole and turn(pry) the ...

...Back off the parking brake cable adjustment. Remove the access hole plug from the backing plate. Using a screwdriver, back off the adjusting screw. Install the access hole plug to prevent dirt or ...

Remove the wheel. Pull the drum from the brake assembly. If the brake drums have been scored from worn linings, the brake adjuster must be backed off so that the brake shoes will retract from the drum