...bolts can you tell me the size? or do i just tap them with a punch ? IF U HAVE BOLTS THE EXHAUST WAS ALREADY REPLACED, IT'S EITHER 1/2 INCH OR 9/16 THE EXHAUST FROM THE FACTORY WAS WELDED, BUT U HAVE ...
Question about Toyota Corolla
...bolts on the firewall side and cant take it off I only have a couple of inches of space to work with, I've tried using different size wrenches,sockets and vise grip none of them worked what can I use ...
...Need to replace Generally starters have 2 or 3 bolts and a thick wire coming from the battery and other miscellaneous connections. You did not specify a vehicle that was on my list, i.e. 1988 Chevy ...
...bolts to 40 ft. lbs. (54 Nm). Engage the solenoid wiring connector onto the starter terminal. Connect the B+ wire and tighten the retaining nut to 90 inch lbs. (10 Nm). Lower the vehicle. Connect the ...
...Size and Put it on The Center Bolt of your Belt Tensioner and Pull the Tensioner to Release the Pressure on Your Belt,While Holding it at that Poition Reach over to your Belt and Take it Off Say Your ...
...40's. Your timing advance range is fixed with the stock computer, but aftermarket add-on's like the Bullydog and others allow timing variations that are adjustable. Depending on how ...
1,826 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
819 Questions
767 Questions
792 Questions
