2005 Toyota Avalon "car door hitting fender" Questions

...might quiet it down .. if the click happens just as the door is opened then make sure the door front edge is not hitting the fender edge. of course lube the hinges and make sure they are not loose

...door and the fender might hit. Most big builds the doors are fitted with the front fenders off and them after the doors aree fitted. ( putting paper in the weather stip and setting the drag of the ...

...door and fender are banging together Sounds like you have a body alignment problem. If you have the door open try to lift up on the bottom edge of the door. You should not have much play. If you do ...

...door rubs against fender, will not allow door to open and close properly . Its wear the skirt of the driver door exterior. Truck is a 2007 ss silverado sounds like one of the door hinges may need to ...

...car was partially stripped already. My question is, how do I get to the bolts that are between the door and the fender, where the fender is bolted onto the door frame? I'm loath to take the door off, ...

or moving the fender back a bit into the door's arc of movement. You will have to take it to a dealer and have the door re-aligned and/or the fender adjusted. This is not an owner serviceable item

...car an need to replace parts.... does anyone have auto body part on the manuel? i have never done auto body but was a machinist so i need operater instruction sheet... repacing hood, l.front ...

...few 10mm bolts along the top of the fender,1 under the wiper cowl,2 at the bottom of the fender by the rocker,1 under the fender along the door edge, and 2 below the headlight then it should come

...car door got hit open to the fender of my truck, nothing was broken, but now none of my windows go down and I can not lock my doors from the inside, all doors lock with the keyless entry except the ...

DOOR THERE SHOULD BE BOLTS THERE ALSO/ RIVETS !!! I HAVE NEVER SEEN ANY FENDER WITH RIVETS UNLESS YOU ARE TALKING ABOUT THE WHEEL WELL AREA THER MAY BE SOME PLASTIC PUSH RIVETS THAT CAN BE REMOVED AND