...jump the thing and get the battery back up. try hooking up a battery charger to the battery cable on the starter relay, and ground the negitive lead to the starter frame. After 5 or 10 minutes try to ...
...jump the wire at the BCM that goes to the relay. Can't you pull down one of the rear seats to gain access ? Bonus info: The driver door key lock has extra functionality when the key is turned to ...
...jump the 8th pin, the paper clip touched the 16th pin causing a short circuit. Then the dome light went out and none of the 4 doors are locking or unlocking. I did check the door lock/unlock fuse and ...
...unlock relay, (but only see 1 relay under the dash), also a Door Lock Inversion Module and a lock control module but dont know where they are located and if one of them would be the problem ???? I ...
...spare key (which stopped remotely unlocking doors a while back) CAN start the car... check the fuses and the start relay,some bmw have fuse back of the truck n glove compactment.use a trster to do ...
...relay click but thats all check gage light is on with battery light on tried jump starting still no crank Dirty battery cables or faulty starter. Do the lights stay on bright while starting? Relay ...
...Is my 929 gone to that junkyard in the sky? DOES THE FACTORY ALARM WORK?TRY LOCKING AND UNLOCKING FROM THE DRIVERS DOOR WITH THE KEY.ALSO STARTER CUT RELAY COULD BE BAD.REMOVE RELAY AND JUMP
...doors,after a jump it works fine, dealer does not have a solution nothing was left on in either case. check the fan belt for looseness, next target is the dynamo is not charging or the charge
255 questions posted
Usually answered in minutes!
244 Questions
279 Questions
212 Questions
141 Questions
160 Questions
