...noise when set to either of the low settings but no air blows except on high. You need to replace the heater blower motor resistor. It is located in the air tube between the motor and the center of ...
...noise inside car. turn key off noise goes away sometimes Does it sound like the noise the turn signal makes? Does the noise change if you change the speed of the blower motor? Do all the function of ...
noise behind glovebox clicking or rattle coming from behind the glove box when key is turned to the on position (not starting). this noise does come back after the truck is started. Its a 1996 nissan ...
...NOISE FROM BEHIND THE GLOVEBOX WHEN THE KEY IS TURNED TO THE ACCESSORIES POSITION.THEN AFTER ABOUT 20SECONDS IT STOPS. THERE ARE NO WARNING LIGHTS SHOWING UP ON THE DASH AND THE CAR DRIVES FINE. ANY ...
...noise behind the glovebox when i start the vehicle depending on what vehicle your talking about --behind gloveboxes ---you have fan --ducting actuators --some fords inertia switch --relays ...
Question about Toyota Highlander
...car is off or the key is turned to the first position there is no noise, once i turn it to the 2nd position I start hearing a pretty loud clicking coming from what sounds like the glove box coming ...
Question about Toyota Highlander
...I start it there is a noise like a bubble or rubbing behind glovebox. 99 lincoln town car the noise last about 30 sec then stops, all windows not working except driver window. need to check the ...
Question about Toyota Highlander
...Never, ever had such a loud noise come from a turned off engine before, and vibration can be felt all the way up the passenger side of the car. Maybe the heater fan shaft is bent causing ...
Question about Toyota Highlander
...noise from coming into car...also, need to change/replace filter on air conditioner located behind the glove compartment as particles of paper-like substance blows into car when air conditioner's fan ...
1996 Jeep Grand Chorkee wont start and there is cliccking noises under the glovebox The Clicking noise is a relay. Most likely the starter relay, probably bad.
487 questions posted
Usually answered in minutes!
375 Questions
365 Questions
318 Questions
235 Questions
204 Questions