2001 Toyota Land Cruiser "crankshaft" Questions

...bearing cap bolt with paint. Re tighten the main bearing cap bolts by 90 degrees. Check that the crankshaft turns smoothly. Connecting rod cap bolts torque: Torque: 24.5 N·m (250 kgf·cm, 18

...is it and if I let it sit for couple of days then it will start. It was suggested that I check the crankshaft sensor and the cameshaft sensor. need some help to resolve this problem. i suppose that ...

engine timing marks for toyota landcruiser 1KZ-TE The idler gear which transmitte motion from crankshaft to injector pump gear.The idler gear is separated into three setion.Those separated gears moved

...is it and if I let it sit for couple of days then it will start. It was suggested that I check the crankshaft sensor and the cameshaft sensor. need some help to resolve this problem. if it starts ...

...leaking . Any better seals than original that have sealing lip running on a different surface on crankshaft? no year, no series and worse no engine type. not really. some makers have sleeves for ...

...rzj95-0047087. This vehical does not start,Digonest code 002:-Fauity RPM Signal(no RPM,NE and crankshaft position signal trnsmitied to ECU after started for 2 secondes) 1.CKP and CMP sensors ...

...marks on a 1988 land cruiser? for timing belt replacmemt what timing? firing or cam and crank?The crankshaft should have a notch on it's inboard flange to line up with a graduated plate on the ...

...motor Engine timing for 2f engine to put timing gear in order first remove the timing cover front crankshaft you can see two gears which is crankshaft and ather one cam-shaft. when you look front ...

...the wiring loom retaining bracket at the front of the sump. My initial thought was that the front crankshaft oil seal was leaking, however, once front of engine had been pulled down, I found that ...

no spark coming from coil. brand new coil crankshaft sensor