2001 Toyota Corolla "tools required replace brake pads" Questions

...required tools and do it yourself for the first time. I can personally do it but would rather not to give you some perspective. Average time to remove and replace a normal disk style brake pad is 20 ...

tools to remove and replace? You can do this job your self with common tools. Auto zone carries the wheel bearing you need and can give you the step by step instructions to replacing the bearing. Here

...tools required to compress the caliper rate as fixya if this is what you need. Thanks Remove the rear disc brake caliper (2K327). Remove the brake caliper bolts. Lift the rear disc brake caliper off ...

...required for your car available at parts store ( some can be pushed back using old pad and c clamp) some require small tool to fit in groves in pad (mostly rears) and use of a ratchet . install new ...

...Replace brake pads as necessary.  Special tool is required to retract caliper piston to fit over new pads. (see picture below)Retract piston in caliper using special tool to rotate clockwise and ...

...tools required crawl underneath the front and look at the caliper if it has a duel piston caliper you will see 2 circles about 3 inches across and if it is a single piston caliper it will only have ...

...brake pad replacement for this vehicle.Are any special tools necessary. yes, you need a piston retract tool for the rear cylinders. rear piston must turn clockwise as it is being retracting. The ...

...tools required,but remember to smear back of pads with copperslip brake grease,stops em squeeking.(prise pistons apart with tyre iron)and remember to unscrew brake fluid cylinder cap to release any ...

...required to bleed the brakes, it plugs into the ABS hydraulic control under the hood and holds the ABS valves open to remove the trapped air during bleeding, u will need to have the dealer bleed the ...

...brake cylinder) with tire tool or large screw driver, so the new thicker pads will go in with ease. Replace new pads acording to toyota and replace bolts/ clips. this method requires no bleeding of ...